Job ID: 21306147
Job Category: Corporate
Location: Georgetown, TX
Job Title: Engineer III, Inspection Systems and Automation
FLSA Status: Exempt
Department: Engineering, Research and Development
Reports to: Manager, Inspections Systems, Testing, and Support
Flex Work Eligible! This position qualifies for the Flexible Work Policy. Employees receive 75 workdays annually to work remote! The initial amount of days is prorated for the first year based on start date.
General Description / Purpose:
The Engineer III, Inspection Systems and Automation provides technical support to the Engineering, Manufacturing, and Operations departments. Assists in the R&D testing and implementation of new and existing products. Works closely with the Engineering and Software Design teams to provide input on product improvements.
ESSENTIAL JOB FUNCTIONS:
Functional & Technical Skills
- Apply knowledge of Programmable Logic Controllers, Power Distribution Modules, and Human Machine Interface software.
- Maintain, set up, and troubleshoot communication networks like Ethernet TCP/IP, Modbus, and RSNetworx.
- Troubleshoot and diagnose electrical, hydraulic, pneumatic, and mechanical systems.
- Analyze electrical schematics, diagrams, and drawings to troubleshoot and interpret system performance.
- Install, set up, and troubleshoot GNSS inertial systems.
- Troubleshoot machine vision and optical systems.
- Provide failure and root cause analysis to the Electrical, Mechanical, and Software design teams.
- Identify, recommend, and implement design and maintenance changes that reduce life-cycle costs, improve productivity, and/or enhance the safety of personnel.
- Provide documentation, technical report writing, and electronic media presentations.
- Identify and direct corrections and/or revision of schematics.
- Advise, conduct, and report on testing for R&D projects.
Communication
- Communicate with and lead peers to effectively improve processes and resolve problems.
REQUIRED QUALIFICATIONS:
Education: Bachelor’s degree in Automation, Robotics, Electronics, or similar
Experience:
- 7+ Years of working experience troubleshooting electrical circuits using electrical schematics.
- 7+ Years of working experience troubleshooting automation control systems.
Licenses/Certifications:
- Obtain and maintain Railroad Certifications
- Possess or ability to obtain a DOT Med Card
- Possess a valid Motor Vehicle Drivers License
Knowledge, Skills and Abilities:
- Knowledge of or ability to quickly become familiar with Railroad products and services, particularly about inspection and maintenance of tracks and structures.
- Knowledge of Microsoft Office applications for preparing technical reports.
- Competency using test equipment such as multimeters, oscilloscopes, and network analyzers.
- Skilled in reading and interpreting electrical, electronic, and logic schematics.
- Skilled in operating systems including Windows, Linux, Unix, and embedded systems.
- Skilled in the design, setup, and troubleshooting of communication networks.
- Skilled in automation systems and controls.
- Excellent verbal and written communication skills.
- Ability to operate high rail vehicles.
PREFERRED QUALIFICATIONS:
Education: Master’s degree in Automation, Electrical, or Robotics Engineering
Experience:
- 5+ years of experience working in a railroad environment.
- 2+ years of experience with leadership.
Licenses/Certifications:
- Possess or ability to obtain Radiographer License.
- Possess or ability to obtain a Commercial Driver License.
Knowledge, Skills and Abilities:
- Welding and Metal Fabrication Skills.
- Familiarity with 3D modeling software, Solid Works, Inventor, etc.
- Knowledge of machine vision systems.
- Knowledge of GNSS inertial and odometry systems.
- Familiarity with ERP systems, SAP, IFS, etc.
WORKING CONDITIONS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the role. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Office deskwork, requiring sitting, walking, using phone & computer.
- May lift up to 50 lbs. occasionally.
- Up to 50% travel including international.
- Ability to work long hours and maintain a flexible travel calendar.
- Ability to be on call for extended hours.
- Can tolerate variable and sometimes challenging conditions during visits or inspections of company equipment in a railroad environment.
- Can tolerate working in a fast-paced environment with time-sensitive deadlines.
Loram is an Equal Opportunity Employer and will make all employment-related decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, national origin, age, disability, marital status, familial status, status with regard to public assistance, membership or activity in a local commission, protected veteran status, or any other status protected by applicable law.
REV August 2024
#LI-AB1
#LI-HYBRID
Job ID: 21306147
Job Category: Corporate
Location: Georgetown, TX
DESCRIPTION
Job Title: Engineer III, Inspection Systems and Automation
FLSA Status: Exempt
Department: Engineering, Research and Development
Reports to: Manager, Inspections Systems, Testing, and Support
Flex Work Eligible! This position qualifies for the Flexible Work Policy. Employees receive 75 workdays annually to work remote! The initial amount of days is prorated for the first year based on start date.
General Description / Purpose:
The Engineer III, Inspection Systems and Automation provides technical support to the Engineering, Manufacturing, and Operations departments. Assists in the R&D testing and implementation of new and existing products. Works closely with the Engineering and Software Design teams to provide input on product improvements.
ESSENTIAL JOB FUNCTIONS:
Functional & Technical Skills
- Apply knowledge of Programmable Logic Controllers, Power Distribution Modules, and Human Machine Interface software.
- Maintain, set up, and troubleshoot communication networks like Ethernet TCP/IP, Modbus, and RSNetworx.
- Troubleshoot and diagnose electrical, hydraulic, pneumatic, and mechanical systems.
- Analyze electrical schematics, diagrams, and drawings to troubleshoot and interpret system performance.
- Install, set up, and troubleshoot GNSS inertial systems.
- Troubleshoot machine vision and optical systems.
- Provide failure and root cause analysis to the Electrical, Mechanical, and Software design teams.
- Identify, recommend, and implement design and maintenance changes that reduce life-cycle costs, improve productivity, and/or enhance the safety of personnel.
- Provide documentation, technical report writing, and electronic media presentations.
- Identify and direct corrections and/or revision of schematics.
- Advise, conduct, and report on testing for R&D projects.
Communication
- Communicate with and lead peers to effectively improve processes and resolve problems.
QUALIFICATIONS
REQUIRED QUALIFICATIONS:
Education: Bachelor’s degree in Automation, Robotics, Electronics, or similar
Experience:
- 7+ Years of working experience troubleshooting electrical circuits using electrical schematics.
- 7+ Years of working experience troubleshooting automation control systems.
Licenses/Certifications:
- Obtain and maintain Railroad Certifications
- Possess or ability to obtain a DOT Med Card
- Possess a valid Motor Vehicle Drivers License
Knowledge, Skills and Abilities:
- Knowledge of or ability to quickly become familiar with Railroad products and services, particularly about inspection and maintenance of tracks and structures.
- Knowledge of Microsoft Office applications for preparing technical reports.
- Competency using test equipment such as multimeters, oscilloscopes, and network analyzers.
- Skilled in reading and interpreting electrical, electronic, and logic schematics.
- Skilled in operating systems including Windows, Linux, Unix, and embedded systems.
- Skilled in the design, setup, and troubleshooting of communication networks.
- Skilled in automation systems and controls.
- Excellent verbal and written communication skills.
- Ability to operate high rail vehicles.
PREFERRED QUALIFICATIONS:
Education: Master’s degree in Automation, Electrical, or Robotics Engineering
Experience:
- 5+ years of experience working in a railroad environment.
- 2+ years of experience with leadership.
Licenses/Certifications:
- Possess or ability to obtain Radiographer License.
- Possess or ability to obtain a Commercial Driver License.
Knowledge, Skills and Abilities:
- Welding and Metal Fabrication Skills.
- Familiarity with 3D modeling software, Solid Works, Inventor, etc.
- Knowledge of machine vision systems.
- Knowledge of GNSS inertial and odometry systems.
- Familiarity with ERP systems, SAP, IFS, etc.
WORKING CONDITIONS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the role. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Office deskwork, requiring sitting, walking, using phone & computer.
- May lift up to 50 lbs. occasionally.
- Up to 50% travel including international.
- Ability to work long hours and maintain a flexible travel calendar.
- Ability to be on call for extended hours.
- Can tolerate variable and sometimes challenging conditions during visits or inspections of company equipment in a railroad environment.
- Can tolerate working in a fast-paced environment with time-sensitive deadlines.
Loram is an Equal Opportunity Employer and will make all employment-related decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, national origin, age, disability, marital status, familial status, status with regard to public assistance, membership or activity in a local commission, protected veteran status, or any other status protected by applicable law.
REV August 2024
#LI-AB1
#LI-HYBRID
ABOUT
Based in Hamel, Minnesota, Loram Maintenance of Way, Inc. designs and builds some of the most sophisticated railway maintenance equipment in the world, delivering high quality products and services to our global customers. This is made possible by employees who are passionate about delivering advanced equipment, innovative solutions, and unrivaled customer service.
For more information about Loram go to:
Based in Georgetown, Texas, Loram Technologies, Inc. provides innovative solutions for the railroad industry. From our friction management application systems to our Aurora® track inspection systems, our products are technologically advanced, safer, more efficient, and more productive than traditional maintenance methods.
For more information about LTI go to:
http://www.loramtechnologies.com
Loram is proud to be an Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities.
RECEIVE JOB ALERTS
Be the first to know about the jobs that are right for you. Set your criteria and sign up now.
About the area
Find out more about Georgetown, TX
Loram is an Equal Opportunity Employer and will make all employment-related decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, national origin, age, disability, marital status, familial status, status with regard to public assistance, membership or activity in a local commission, protected veteran status, or any other status protected by applicable law.
Loram is committed to protecting the identity and personal information of any potential employee. Loram applicants will only be contacted by Loram employees with an authentic Loram email address ending in @loram.com. We encourage you to verify the identity of any individual who claims to be a member of the Loram team by confirming the email address is @loram.com with no additional characters or letters. We will never request financial information or a financial commitment as part of the recruitment process. If you have a question about the authenticity of any communication claiming to be from Loram, please contact loramrecruiting@loram.com. Reports can be submitted online at www.loram.ethicspoint.com or by calling 1-844-635-4640.
- © 2024 Loram Maintenance of Way, All rights reserved.
- Terms of Use
- Privacy Policy